Teco Tecoponics HY-1000 Hydroponic Chiller

For standard systems & aquariums up to 200 gallons

The new Hydroponics chiller line is the next generation of TECO chillers–used by consumers and professionals for over two decades. New changes include an increase in cooling efficiency and improved usability, functionality, and durability.

EFFICIENT COOLING TECHNOLOGY

Internationally-recognized high-end compressors and titanium coaxial heat exchangers provide high performance, low energy consumption, and low noise levels.

BUILT-IN HEATER

The Hydroponics HY-1000 comes standard with a heater built into the unit (previously, had to be purchased and installed separately). The built-in heater provides better control over water temperatures and can be operated through the digital thermostat.

DIGITAL THERMOSTAT

Intuitive controller with accurate temperature detection from 60.8°F to 71.6°F. Closed loop temperature control system with an extremely tight differential of 1°C. Displays in °F or °C, and audible alarms for certain situations.

EFFICIENT DESIGN

A solid and durable structure designed to guarantee near perfect protection against corrosion. Rotatable in-set water connections, rotatable exhaust conveyor, and smaller form-factor help facilitate placement of chiller in confined spaces.

TECHNICAL SPECIFICATIONS

Aquarium Size	Between 60-200 gallons
Horsepower	1/4 HP
Wifi Capable	YES
Maximum Pressure	8.7 psi
Minimum Flow Rate	132 gallons per hour
Maximum Flow Rate	211 gallons per hour
Water Inlet/Outlet Thread	3/4″ SAE thread (19mm)
Inlet/Outlet Barb Fitting	D 5/8″ (0.63″ or 16mm)
Exchanger	Titanium
Supply	120V-60Hz
Power Consumption	315 Watts
Gas Refrigerant	R290
Minimum Set Point	60.8 F
Maximum Set Point	71.6 F
Weight	44.1 lbs
Dimensions	12.2″ x 12.2″ x 18.03″

Cooling Performance

The ability of the HY-1000 to pull down temperatures in a 86°F room:

Aquarium Size	Temp. Attainable	Heating Load	Net Pull-Down	C.O.P.*
260 gallons	77°Ffrom 86°F	1.89 Watts/gal	9°F cooler	2.1
55 gallons	47°Ffrom 86°F	0.38 Watts/gal	39°F cooler	1.3

* Coefficient of Performance (COP) – a numerical value that represents cooling performance from a baseline room temperature of 86°F and a typical heat source (aka. Heating Load)