RO/DI Flood Guardian – RODI Auto Shut Off Solinoid – AutoAqua

Stop the Floods. Start the Convenience.

Making RO or RO/DI water for your aquarium is a time-consuming necessity, but forgetting to turn it off shouldn’t cost you a flooded floor. TheAutoAqua Smart ASOVis the ultimate “Flood Guardian,” an intelligent electronic shut-off system designed to automate your water production with fail-safe precision.

Unlike traditional mechanical float valves that are prone to sticking, rusting, or failing due to salt creep, the Smart ASOV uses advanceddual-optical sensor technologyto detect water levels and shut off your RO system instantly.

Why Choose the Smart ASOV?

• Dual-Sensor Security:Equipped with a patented dual-optical sensor, it provides double the protection. If one sensor fails, the second acts as a redundant fail-safe to prevent overfilling.

• Tool-Less Installation:The magnetic mount allows you to attach the sensor to any reservoir, bucket, or jug in seconds. No drilling or permanent modifications are required.

• Universal Compatibility:Whether you use a brute trash can, a glass tank, or a plastic jug, the high-strength magnets work on containers up to 1/2 inch (12.7 mm) thick.

• Real-Time Monitoring:The sleek controller features a multi-color LED and an audible alarm to notify you when filling is complete or if the system enters standby mode.

Key Features

• Electronic Precision:Replaces unreliable mechanical float valves with a high-performance electronic solenoid.

• Portable Design:Easily move the system from one container to another—perfect for hobbyists who fill different reservoirs for mixing and top-offs.

• Fail-Safe Operation:Designed to shut off water production even in the event of a power outage or sensor obstruction.

• Plug-and-Play:Includes everything you need to get started—no complex wiring or programming necessary.

What’s in the Box?

1. Smart ASOV Controller(with integrated Dual-Optical Sensor)

2. Universal Power Adapter(100-240V)

3. RO Solenoid Valve(1/4” Quick Connect)

4. RO Tubing Holder(to secure the fill line)

Technical Specifications

• Power Input:100-240 VAC 50-60 Hz

• Solenoid Valve:6W @ 12 VDC (1/4 inch RO Tubing Connection)

• Max. Mounting Thickness (Sensor):1/2 inch (12.7 mm)

• Max. Mounting Thickness (Tubing Holder):1.2 inches (30.5 mm)

• Cable Length (Sensor to Controller):10 feet (300 cm)

• Cable Length (Solenoid):4 feet (120 cm)

Ideal For:

• Aquarium hobbyists looking to automate RO/DI water production.

• Preventing costly water damage in homes or apartments.

• Users who need a temporary, portable shut-off solution for different mixing containers.

Instructional Note:Filtered water is required for the solenoid valve. To prevent sediment buildup and ensure longevity, the solenoid valve should be installed after the pre-filtration stages of your RO/DI system.