Reverse Osmosis Membrane Flush Valve – Bulk Reef Supply

The Membrane Flush/Flow restrictor valve is an all in one flow restrictor equipped with a flush valve for easy worry free use.

Keeping the flush and flow restrictor in a single package keeps fitting count down which means less chance for possible leaks or failures down the line.

• 550 mL/min for 75 GPD single membranes or 150 GPD Water Saver Systems
• 800mL/min for 100 &150 GPD single membranes or 200 GPD Water Saver System

Reverse Osmosis membrane flush/flow restrictor valves increase the flow to the membrane by bypassing the flow restrictor when the valve is opened. This helps flush deposits and significantly increases the usable life of the RO membrane. The Membrane Flush/Flow restrictor valve is an all in one flow restrictor equipped with a flush valve for easy worry free use. Keeping the flush and flow restrictor in a single package keeps fitting count down which means less chance for possible leaks or failures down the line. BulkReefSupply.com recommends flushing the membrane before and after each use for a few seconds, or every few weeks for a few minutes as part of regular reverse osmosis system maintenance. When the handle on the valve is “in line” the valve is bypassing the flow restrictor and is in “flush mode,” if the handle is perpendicular to the valve then the unit is ready for normal use.