| SKU | Reverse Osmosis Canisters |
|---|---|
| Aquarium Type | Saltwater, Freshwater |
| Filter Dimensions | 10 in. x 2.5 in. (Standard), 10 in. x 4 in., 20 in. x 2.5 in., 20 in. x 4 in. |
We carry a wide variety of reverse osmosis canisters, and depending on your system or reactor we most likely have the canister to fit your needs. The most common RODI systems along with the BRS systems use the 10″ Canister with 1/4″ ports*. The standard and dual BRS Reactors use the same 10″ canister but with 1/2″ ports, and deluxe reactors use the 10″ canister with 1/2″ ports.
Sizes Available:
- 5″ x 2.5″ Reverse Osmosis Canister with 1/2” Ports(BRS mini reactor canister)
- 10″ x 2.5″ Reverse Osmosis Canister with 1/4″ NPT Ports*(typical replacement RO canister)
- 10″ x 2.5″ Reverse Osmosis Canister with 1/2” NPT Ports(BRS carbon & GFO canister)
- 10″ x 2.5″ Reverse Osmosis Deluxe Canister with 1/2” Push Connect Ports(BRS deluxe carbon & GFO canister)
- 20“ x 2.5″ Reverse Osmosis Canister with 3/8” NPT Ports
Note:Fittings are not included. Canisters with pressure relief ports may have a red or green button and may vary from canister to canister.
*Regarding 10″ x 2.5″ Reverse Osmosis Canister 1/4″ Ports (SKU: 200001):Manufacturer changes to this product now cause the ports to not properly line up with the older style canister. If you are replacing a canister on an older BRS RO/DI system, you will want to replace all canisters that are linked together with nipple fittings. Alternatively, you can use 1/16″ Nylon washers on the new style canister to get them to line up.
Reviews
There are no reviews yet.