Maxspect Phosphree 250 ml.
A polymer phosphate removal resin that is chemically stable and will not leak any metal ions into the water column like metal-based absorbents. Available in 250ml and 500ml sizes.
Slow absorption phosphate removal resin that will not discolor the Water
Maxspect Nano-Tech Phosphree is a polymer resin that is chemically stable and will not leak any metal ions into the water column like commonly used metal-based absorbents. The slow absorption rate of Phosphree reduces stress by acclimating the aquarium inhabitants to the reduction of phosphate in the water column.
250ml / 8.5 fl oz
250 ml (8.5 fl oz) of Maxspect Phosphree will remove 3 ppm of phosphate from a 1000 liters (264 gallons) marine/reef aquarium.
The Phosphate Absorption Rate Test
The Phosphate Absorption Rate Test was performed in a controlled environment with three aquariums with 100L of seawater container 1.0ppm (±0.03) of phosphate. Tricalcium Phosphate was added to the water to achieve an equal phosphate level of 1.0ppm. A Hanna HI97713 Phosphate Low-Range Portable Photometer was used to test phosphate levels within the three test aquariums.
Tank A:100L of seawater with 60ml ofIron-Based Absorbent
Tank B:100L of seawater with 60ml ofAluminum-Based Absorbent
Tank C:100L of seawater with 60ml ofNano-Tech Phosphree
60ml of each phosphate absorbent media was placed within a fine mesh bag, with medium water flow provided by a Gyre pump. Thee water samples of each of the three testing tanks were collected every 24hours for a duration of 8 days.
Reviews
There are no reviews yet.