IM AUQA Gadget – Helio Heater – 200 Watt

IM AUQA Gadget – Helio Heater – 200 Watt

Aquarium Size:25 – 50 Gallons
*Based on +10°F water temperature increase from current ambient temperature.
Heating Element Dims:L 7″ x D .80″
Remote Sensor Dimensions:L 2.3″ x D .31″

Helio Smart Controller Dims:L 3.13″ x W 1.31″ x H 5″

Helio PTC Smart Controller Specifications

• Factory Preset Temperature:77°F
• Factory Preset Low Alarm:74°F
• Factory Preset High Alarm:80°F
• Temp Set Range:59° – 95°F
• Low Alarm General Range:57° – 93°F
• Low Alarm Minimum Range:-2°F from Set Temperature
• High Alarm General Range:60° – 96°F
• High Alarm Minimum Range:+1°F from Set Temperature
• Accuracy:< ±1°F
  
• Resolution:0.1°F
  
• Calibration Range:±9°F
• Watt/Amp Draw:200W 120V / 1.67amps
• Product Weight:2.49 lbs.

Error Code Quick Guide

E1-Remote Sensor Not Connected: The remote sensor is not connected. Check the connection between the controller and the remote sensor.

E2-Element(s) Not Connected: One or both elements are not connected. Check the connection between the controller and element(s).

E3-High Temperature Alarm: The aquarium’s water temperature has exceeded the high temperature set point.

E4-Low Temperature Alarm: The aquarium’s water temperature has subceeded the low temperature set point.

E5-Element (I) Error: Element (I) is out of water or low water flow detected around element (I).

E6-Element(II) Error: Element (II) is out of water or low water flow detected around element (II).

E7-Remote Sensor Error: Remote sensor has been detected to be out of water or a sudden temperature swing.