IceCap 4-Stage Reverse Osmosis Water Filtration Systems

The IceCap RO/DI water filtration system is a four-stage reverse osmosis de-ionization filter system that efficiently removes up to 99% of tap water impurities. IceCap RO/DI system does not require a power source and can be installed within minutes to create the perfect water for your freshwater aquarium, saltwater, as well as reef aquariums.

4 Stage Value RO/DI Features:

• RO/DI single-membrane system with durable clear filter canisters
• Glycerin-filled pressure gauge
• Single Dow Filmtec membrane (The best there is.)
• 5 µ IceCap polypropylene sediment pre-filter
• 5 µ IceCap carbon block filter
• Refillable DI cartridge with high-capacity color changing resin
• All-in-one universal filter wrench to tighten and loosen canisters
• Installation connection fittings, polyethylene tubing & accessories
• Does not require a power source to run
• 1yr Warranty(Warranty does not include filters)
• Users Guide

75gpd System General Details:

• Optimal Feed Water Pressure: 50-80 psi
• Maximum Handling Water Pressure: 150 psi
• Optimal Water Temperature: 25° C (77° F)
• Maximum Water Temperature: 39° C (90° F)
• pH Range: 2-11
• Typical Rejection Rate: ~1:3
• Uses standard 10in canisters, cartridges, and ¼in push-connect fittings

Dimensions (LxWxH):16in x 6.5in x 15.5in
Limited Warranty:1 year (does NOT include filters)

---

IceCap RODI System Comparison Chart

4-STAGE RO/DI MODEL:	75GPD System Item#: IC-RI75	100GPD System Item#: IC-RI100	150GPD System Item#: IC-RI150	200GPD System Item#: IC-RI200
Gallons Per Day	75*	100*	150*	200*
Dimensions (LxWxH)	16 x 6.5 x 15.5in	16 x 6.5 x 15.5in	16 x 6.5 x 18in	16 x 6.5 x 18in
Sediment Filter – Stage 1	IceCap 5 Micron Sediment Filter	IceCap 5 Micron Sediment Filter	IceCap 5 Micron Sediment Filter	IceCap 5 Micron Sediment Filter
Carbon Block-Stage 2	IceCap 5 Micron Carbon Block	IceCap 5 Micron Carbon Block	IceCap 5 Micron Carbon Block	IceCap 5 Micron Carbon Block
Membrane – Stage 3	75gpd DOW Filmtec Membrane^	100gpd DOW Filmtec Membrane^^	75gpd DOW Filmtec Membrane^	100gpd DOW Filmtec Membrane^^
Deionization Resin – Stage 4	Mixed Bed DI Resin with Refillable Cartridge	Mixed Bed DI Resin with Refillable Cartridge	Mixed Bed DI Resin with Refillable Cartridge	Mixed Bed DI Resin with Refillable Cartridge
Waste to Product Water Ratio	3:1	3:1	1.5:1	1.5:1
Rejection Rate	99%*	98%*	99%*	98%*
Auto Shut Off Valve	Yes	Yes	Yes	Yes
Manual Flush Flow Restrictor	Yes	Yes	Yes	Yes
Installation Adapters	Yes	Yes	Yes	Yes
Recommended Min Water Pressure**	50-80psi	50-80psi	65-80psi	65-80psi
Plumbing Size	1/4in RO Tubing	1/4in RO Tubing	1/4in RO Tubing	1/4in RO Tubing

Low pressure may cause the RODI system to produce excessive wastewater. Water pressure can be increased by adding a booster pump before your RO/DI system.

Reverse Osmosis Membrane Specifications

RO MEMBRANE	^Dow Filmtec 75gpd (BW60-1812-75)	^^Dow Filmtec 100gpd (TW30-1812-100HP)
For IceCap Models	75gpd, 150gpd	100gpd, 200gpd
Typical Rejection Rate	96%-99%*	96%-98%*
Source Water Pressure	50psi	65psi
Source Water Temperature	77°F	77°F
Source Water TDS	250ppm soften tap water	250ppm soften tap water
Recovery	15%	15%
Minimum Salt Rejection	96%	96%

*Membranes have a typical stabilized salt rejection rate that can be reproduced through the conditions stated above.

Please refer to the link below for instructions on installing and using the IceCap RODI water filtration systems.
Pertains to IceCap 4 Stage RO/DI Model: IC-RI75, IC-RI100, IC-RI150, IC-RI200

WARRANTY

CoralVue, Inc. and IceCap hereby guarantee this product tobe free from defects in material and workmanship for a period of:

• 90days

Warranty is activated on the date of purchase.

This Standard Limited Warranty applies and is limited as follows:

• To the product only as long as it remains in the possession of the original purchaser.
• To the product that has not been subject to accident, misuse or abuse.
• To the product that has not been modified, altered, defaced, or had repairs made or attempted byother than CoralVue, Inc.
• That CoralVue be immediately notified in writing within ten (10) days of first knowledge of defectby owner or his agent.
• That CoralVue, Inc. shall be given first opportunity to make any repairs, replacements orcorrections to the defective construction within a reasonable period of time.
• Under no circumstances shall CoralVue and/or the Manufacturer be liable by virtue of this warrantyor otherwise for damage to any person or property whatsoever for any special, indirect, secondary orconsequential damages of any nature however arising out of the use or inability to use because ofthe product defect.

Click here to learn more.

PRODUCT SUPPORT

To submit a warranty claim, please visit our CoralVue SupportPortal.