| SKU | Helio PTC Smart Heaters – Innovative Marine |
|---|---|
| Apex Compatible | No |
| Included Mounting | Magnetic |
| Max Tank Thickness | 12mm / 0.47in. (≈1/2″) |
| WiFi | No |
| Controller Type | Single Stage |
| Temperature Range | 59°F to 93°F |
| Warranty | 5 years |
| Aquarium Type | Saltwater, Freshwater |
| Temperature Control | Controller (Included) |
Smart, Safe & Stable Aquarium Heating
- PTC Solid-State Ceramic Heating Technology
- Overheat-Resistant Titanium Heating Elements
- Dedicated Smart Controller with Audible Alarms
- Remote Titanium Temperature Probe
- Supports Single or Dual Heating Elements
- Magnetic Holders for Secure, Tool-Free Mounting
The Helio line from Innovative Marine are a new line of aquarium heaters utilizing advanced PTC (positive temperature coefficient) technology to exceed current reef aquarium heater standards for improved safety and reliability. Unlike traditional heating elements that utilize resistance wires to generate heat, the Helio heaters were developed utilizing PTC technology from the aquaculture industry, which relies on solid-state ceramic chips that are programmed to reach a predetermined temperature. Thanks to these smart ceramic chips, the heaters are naturally resistant to overheating, and the PTC smart controller continually communicates with and monitors the heating elements to maintain a stable temperature.
Each piece of the Helio heating system was created to work together. The PTC smart controller has been fitted with a titanium remote temperature sensor and dual heating element power lines. Since each heating element has its own built in temperature regulation system, there’s safety in redundancy from the controller’s temperature sensor. And if dual heating elements are employed, there is yet another level of safety added to the system. Commercial grade titanium heating sheaths and screws prevent corrosion. Rare earth magnetic heating element holders allow optimal water flow. Quick disconnects for the controller’s temperature sensors and heating elements make for easy maintenance and upgradeability.
Helio PTC Smart Heater Comparison Chart
| Model | Wattage | # Elements | Recommended Tank Size | Element Length |
|---|---|---|---|---|
| Helio 100W | 100W | 1 | 10–25 gal | 5.75 in |
| Helio 200W | 200W | 1 | 25–50 gal | 7 in |
| Helio 200W (Dual) | 200W (2 × 100W) | 2 | 25–50 gal | 5.75 in |
| Helio 350W | 350W | 1 | 50–100 gal | 15.25 in |
| Helio 400W (Dual) | 400W (2 × 200W) | 2 | 50–100 gal | 7 in |
| Helio 700W (Dual) | 700W (2 × 350W) | 2 | 100–200 gal | 15.25 in |
Helio 100W
Wattage100WHeating Elements1Recommended Tank Size10–25 galElement Length5.75 in
Helio 200W
Wattage200WHeating Elements1Recommended Tank Size25–50 galElement Length7 in
Helio 200W (Dual)
Wattage200W (2 × 100W)Heating Elements2Recommended Tank Size25–50 galElement Length5.75 in
Helio 350W
Wattage350WHeating Elements1Recommended Tank Size50–100 galElement Length15.25 in
Helio 400W (Dual)
Wattage400W (2 × 200W)Heating Elements2Recommended Tank Size50–100 galElement Length7 in
Helio 700W (Dual)
Wattage700W (2 × 350W)Heating Elements2Recommended Tank Size100–200 galElement Length15.25 in
Tank size recommendations may vary depending on ambient room temperature and system conditions.
Specifications
- Helio Controller Dimensions: 3.13″ x 1.31″ x 5″
- Factory Preset Temp: 77°F
- Factory Preset Low Alarm: 74°F
- Factory Preset High Alarm: 80°F
- Temp Set Range: 59°F to 95°F
- Low Alarm Range: 57°F to 93°F
- Low Alarm Minimum Range: -2°F from Set Temp
- High Alarm Range: 60°F to 96°F
- High Alarm Minimum Range: +1°F from Set Temp
- Accuracy: ±1°F
- Resolution: 0.1°F
- Calibration Range: ±9°F
What’s Included?
Helio PTC Controller
Temperature Probe
Magnetic Temperature Probe Mount
Helio PTC Heating Element(s)
Magnetic Heating Element Holder(s)
Reviews
There are no reviews yet.