TheIceCap Heater Controllerallows precise temperature regulation for your aquarium by connecting up to two heating elements (sold separately). With dual-heating power jacks and support for up to 1000 watts, this controller ensures a stable aquatic environment. For added safety, it can be integrated with an external aquarium system controller.
Features:
- Dual Grounded Output Heater Control– Supports up to two heating elements.
- High Capacity– Accommodates a combined total of 1000 watts.
- Accurate Heat Control– Maintains precise temperature regulation.
- Freshwater & Marine Compatible– Designed for all aquarium types.
- 1-Year Limited Warranty– Ensures product reliability.
Specifications:
| Specification | Details |
|---|---|
| Temperature Control Modes | On/Off Control, Heating |
| Temperature Control Range | 20-34°C / 68-93°F |
| Temperature Resolution | 0.1°C / 32°F |
| Temperature Accuracy | ±1°C / ±1°F |
| Ambient Temperature | <35°C / 95°F |
| Audible Alarm | Over Temperature Alarm |
| Input Power | 100 ~240VAC/60Hz |
| Relay Contact Capacity | Heating (10A, 100-240VAC) |
| Controller Dimensions | 3.125in x 5.375in x 1.125in |
| Probe Cord Length | 5ft |
| Heater Outlet Cord Length | 18in |
| Calibration Offset | ±5.0° (C/F) in 0.5° increments |
Controller Requirement
Heater Controller Only – Requires a Proper-Sized Heater(s) to Operate.
Indoor Use Only.
LED Indicators:
- Blue
LED – Indicates power is ON. - Red
LED – Indicates heater power is ON.
Button Functions:
- Power/Set Button:Hold
for 5 seconds to turn the controller ON/OFF. Press once to enter target temperature setting mode. - C/F Button:Press to switch between Celsius and Fahrenheit.
- Plus (+) Button:Increases the target temperature. Press
to save. - Minus (-) Button:Decreases the target temperature. Press
to save.
Controller Temperature Calibration:
- Compare the aquarium’s water temperature on a separate thermometer with the Heater Controller display.
- If there is a large discrepancy, press and hold<+>and<->simultaneously for 3 seconds until the water temperature display blinks.
- Adjust up or down in±5.0° (C/F) incrementsusing the<+>or<->buttons.
- Press
to confirm the calibration setting. - The bottom display will revert to showing the water temperature.
Order your IceCap Heater Controller today and ensure your aquarium maintains a stable water temperature!
Reviews
There are no reviews yet.