Aqua Meds NitroCure

A pure nitrofurazone treatment designed for koi and goldfish. This powerful antibacterial helps fight common bacterial infections including ulcers, fin rot, gill disease, and other external or systemic infections. NitroCure delivers professional-grade treatment trusted by koi keepers for rapid results and dependable effectiveness. Available in convenient sizes, NitroCure gives you flexibility to treat individual fish or entire ponds with dip treatments, short-term baths, or long-term baths.

• Pure, pharmaceutical-grade nitrofurazone � no fillers
• Effective against a wide range of bacterial infections in koi and goldfish
• Flexible application methods: dip, short-term bath, or long-term bath

NitroCure� Treatment Instructions

1. Dip Treatment (Individual Fish)

Purpose:Rapid, high-concentration exposure for severe localized infections (ulcers, fin rot, mouth rot).

Duration:15�20 minutes.

Dosage:100�300 mg/L (≈ 0.38�1.13 g per gallon).
Example:5 gallons of dip water → 2�6 g NitroCure.

1. Fill a clean container with fresh, dechlorinated pond water.
2. Add the correct amount of NitroCure and stir until dissolved.
3. Place the koi in the dip for 15�20 minutes, observing closely.
4. Provide aeration during treatment.
5. Remove fish immediately if signs of stress occur.
6. Return koi to the main pond or recovery tank.

2. Short-Term Bath Treatment

Purpose:Broader antibacterial exposure for several fish or moderate infections.

Duration:6�8 hours.

Dosage:25 g per 1,000 gallons (≈ 6.6 mg/L).
Examples:250 gallons → 6.25 g | 1,000 gallons → 25 g

1. Pre-dissolve NitroCure in a bucket of warm pond water.
2. Add evenly across the treatment tank or pond.
3. Maintain strong aeration throughout.
4. Leave fish in treatment water for 6�8 hours.
5. Perform a 25�30% water change after treatment if practical.

3. Long-Term Bath Treatment

Purpose:Continuous, lower-dose exposure for systemic infections or pond-wide outbreaks.

Duration:5�7 days (re-dose if water changes are made).

Dosage:19 g per 1,000 gallons (≈ 5 mg/L).
Examples:1,000 gallons → 19 g | 5,000 gallons → 95 g

1. Mix the correct amount of NitroCure in a bucket of pond water.
2. Distribute evenly around the pond.
3. Keep filters and aeration running as normal.
4. Avoid carbon or other chemical filtration during treatment.
5. Observe fish daily for improvement.
6. After 5�7 days, perform a 25�30% water change.

Quick Reference Dosage Table

Treatment	Dosage	Example Coverage
Dip	100�300 mg/L (0.38�1.13 g/gal)	5 gal → 2�6 g
Short-Term Bath	25 g / 1,000 gal (6.6 mg/L)	1,000 gal → 25 g
Long-Term Bath	19 g / 1,000 gal (5 mg/L)	5,000 gal → 95 g