Water Saving Upgrade Kits are probably the most recommended RODI upgrade. If you have proper pressure (65+ PSI) we highly recommend installing the kit, because it will produce water twice as fast as a standard 75 GPD or 100 GPD membrane while cutting the amount of wastewater in half.
The 200 GPD Water Saver Upgrade Kit will increase the production of any 75 GPD reverse osmosis system to 150 GPD or 100 GPD RO membrane up to 200 GPD without having to use any additional water. With the installation of this kit water production will increase from approximately three gallons per hour to six gallons per hour! It does require 65psi or more into the first membrane in order to function properly and be efficient. If your home’s water pressure is less then the recommended PSI do not worry, adding a booster pump is simple and only takes a couple of minutes.
Recommended Conditions:
- Minimum Water Pressure – 65 PSI
- Max Water Pressure – 90 PSI
- Recommended Water Temperature – 77°F
- Recommended Max TDS –<300ppm
Water pressure can be increased by adding a booster pump before your RO/DI system if a pressure increase is required. Low pressure will cause slow production of product water, with excess production of wastewater. Pressure over 90 PSI may cause damage to the RO/DI units filters and components.
What’s Included?
- 100 RO Membrane
- 2x 2.5″ x 2.5″ membrane clips
- 3x 1/4″ T-Push Fittings
- RO membrane housing
- ¼” tube splitter
- 3 Feet of Yellow and Blue RO Line
Reviews
There are no reviews yet.